Security Grille Aperture Sizes: A Measuring Guide
Security grille aperture sizes describe the gaps within the grille, while opening dimensions determine the size you order. Both matter when balancing shopfront visibility, protection and a good fit.
A clear display needs open sightlines, but the complete grille also needs suitable locks, tracks and fixings. Recording the overall dimensions, fitting position and operating space helps you avoid an installation that restricts access or clashes with the window.
Start by separating the grille’s individual openings from the building opening it protects.
Key takeaways
- Collapsible grilles are ordered by overall width and height, including all tracking and fixing posts.
- Measure at several points, use the smallest dimensions and record where the tracks will sit.
- Aperture size influences visibility, but security depends on the complete assembly.
- Allow space for the folded stack or roller mechanism, as well as the grille itself.
Balance visibility against the type of protection needed
Keep useful sightlines through the shopfront
On shop fronts where display visibility matters, larger gaps generally make a grille less visually obstructive. However, rod thickness, pattern and viewing angle also affect how clearly customers can see your display.
A grille can suit a shop inside a managed retail centre, where the building already provides shelter. Meanwhile, an exposed high-street frontage may need more protection against thrown objects and damage to glazing.
Our comparison of shopfront grilles and roller shutters explains the broader choice between an open barrier and a solid security shutter.

Consider the whole barrier and its position
Smaller gaps restrict some access through the grille, but they don’t establish its resistance to forced entry. Locks, joints, guides and the supporting structure also matter.
Position matters too. HVP recommends placing Armourshield behind glazing rather than externally in high-risk locations. Face fitting and reveal fitting describe attachment positions; neither automatically means an internal or external installation.
For powered systems, moving gaps introduce separate hazards. The DHF powered-door safety code covers draw-in risks around shutter rolls and moving components.
Security grille aperture sizes compared
Armourshield rod sizes and openings
HVP publishes the following figures for Armourshield roller grilles.
| Rod diameter | Published aperture | Quoted approximate area |
|---|---|---|
| 6mm | 60mm wide by 50mm high | 20cm² |
| 8mm | 110mm wide by 105mm high | 90cm² |
These are product-specific figures. The approximate areas are HVP’s quoted values, not width-times-height calculations.
The thicker 8mm rod accompanies a larger opening in this range. Therefore, rod diameter alone doesn’t tell you how closely spaced the grille will be. Compare the spacing of the steel rods and steel bars across the complete pattern rather than assuming thicker steel always means smaller gaps.

How Armourshield styles change the barrier
Armourshield style A uses closely spaced steel bars and smaller openings, making it suitable for bars, serveries and reception counters. These locations often need restricted access through an opening while retaining visibility.
Style D adds a solid bar between the rings and is HVP’s maximum-security configuration within this range. That description compares its construction with the other styles; it doesn’t establish a universal security rating for any grille with similar gaps.
Security grille aperture sizes therefore need to be read alongside the pattern specification, rather than as a stand-alone security score.
How to measure a collapsible security grille
Collapsible grilles are priced and ordered by overall width and overall height, including all tracking and fixing posts. The clear gap between the posts isn’t the order width.
- Choose the fixing plane first. Identify whether the grille will sit inside the reveal or against the surrounding face. Measure at the actual track position.
- Measure the width at several heights. Record the top, middle and bottom dimensions. Use the smallest width for a reveal-fit assessment.
- Measure the height in several places. Take readings at both sides and through the middle. Record the smallest height.
- Assess squareness. Compare the diagonals and note sloping heads, uneven floors or bowed reveals. Smallest dimensions alone won’t describe a badly distorted opening.
- Record obstructions and operating space. Include handles, hinges, blinds, cill projections and the space available for the folded stack.
The smallest readings help prevent a grille from binding against a tighter part of the opening. However, a substantial irregularity may require preparation or a different fixing arrangement.
Seceuroguard’s measuring guidance describes a 10mm allowance on width and height as normal, depending on the surface finish. Where that allowance applies, each overall dimension is the smallest opening dimension minus 10mm, not minus 10mm at each side.
That deduction isn’t a universal face-fit rule. Face-fit dimensions must include the required fixing positions outside the opening.
For retractable grille configurations, also record whether the grille will stack to one side or divide into two sections.
Choose face fitting or reveal fitting
Face fitting usually helps preserve doorway width
A face-fitted grille attaches around the opening rather than between its sides. This usually suits doorways with enough surrounding space because the folded gates can sit outside the main passage.
However, the available wall must accommodate the fixing posts and stack. Stack width varies with the grille’s overall width, so it needs its own space allowance.
Measure the remaining clear passage with the grille parked open. Door leaves, handles and nearby walls can still restrict access even when the main opening appears wide enough.
Reveal fitting often suits windows
A reveal-fitted grille sits within the opening. This suits many windows because a small reduction in the clear aperture is usually acceptable.
Tracks can sit close to the window, leaving more cill space for curtains or blinds. However, deep cills can narrow the opening at the track entry point, so measurements taken against the glass may be misleading.
Record reveal depth, cill projection and the height of the intended bottom track. Window handles and opening sashes also need clearance throughout their movement.
Allow space for roller grille hardware
Roller grilles need room for the curtain roll, endplates and vertical guides. The visible opening alone doesn’t describe their installation envelope.
HVP gives this endplate size guide.
| Shutter height covered by guide | Endplate dimensions |
|---|---|
| Up to 2400mm | 305mm by 305mm |
| Up to 3600mm | 355mm by 355mm |
| Up to 4500mm | 405mm by 405mm |
The published Armourshield maximum is 5500mm wide by 3500mm high. Although the endplate guide extends to taller shutters, that doesn’t increase the stated maximum for this grille.
HVP also lists guide setbacks of 25mm or 30mm. Consequently, a survey needs headroom, side room, fixing depth and overhead obstructions alongside width and height. Record whether beams, signs or ceiling services occupy the proposed roll position.
Electric Armourshield operation uses an internal tubular motor with manual override. HVP states that electric units include a safety brake to meet BS EN 13241:2003-1 unless specified otherwise.
A brake is only one part of powered-system safety. The HSE’s guidance on powered-door standards also addresses risk assessment and appropriate protective measures.
Additional locking options include guide pin locks or a ground padlock with a motor isolator box. These need to work with the operating arrangement so the motor can’t drive against an engaged lock.
Keep ventilation grilles separate from shopfront grilles
Pressure relief vents have a different purpose: their protective grilles must preserve the airflow required by the vent system.
AFP’s vent-protection grille specifications describe its SG light-duty model as 2mm galvanised punched steel with 40mm square apertures. Its design matches the free vent area, or FVA, of AFP pressure vents.
The heavier SGHD range uses 16mm steel bars. Published options include 20mm for SGHD SR2 and 25mm for SGHD SR3, with a stated lead time of five to ten working days.
AFP positions these units through the wall liner and behind an external louvre. They aren’t interchangeable with a shopfront roller grille simply because both products use steel openings.
For ventilation, total free area matters alongside individual aperture dimensions. A grille placed across a pressure-relief opening must belong to the vent’s intended arrangement; a convenient-looking mesh isn’t an equivalent specification.
Frequently asked questions
Why does the folded stack need measuring?
An open collapsible grille still occupies space. Its stack grows with overall width and can obstruct a doorway, display or adjacent window.
Record where the stack will park and how much clear opening remains. This is particularly important where customers or deliveries use the same entrance.
Does aperture size establish insurance approval?
Aperture dimensions alone don’t establish insurance acceptance. Where a rated grille is required, the security performance belongs to the complete tested assembly, including its locking arrangement, frame and fixings.
A familiar-looking lattice pattern isn’t a substitute for that assembly specification.
Does servicing matter once the grille fits?
Yes. Wear, misalignment and damaged locking components can affect operation after installation. Powered systems also need attention to their safety devices.
The HSE’s powered-door safety guidance addresses deterioration and environmental effects. Regular servicing helps identify developing faults before they cause a breakdown or leave the opening unsecured.
Specify the complete grille, not just its gaps
The right aperture preserves useful visibility while supporting the protection your premises need. However, a successful installation also depends on accurate overall dimensions, sound fixings and enough operating space.
At UK Doors & Shutters, we provide security grille installation across Bolton and the North West. We consider the opening and fitting arrangement together.
Contact Us to arrange a survey for a grille sized around your shopfront, window or doorway.



Leave a Reply
Want to join the discussion?Feel free to contribute!