Retractable Security Grilles: Single or Bi-Parting?
Choose single-panel retractable security grilles when you have enough stacking space on one side. Choose bi-parting grilles when splitting the stack across both sides better suits a wider opening.
For security grilles, the deciding measurement is the usable opening left after the grille folds back, especially at entrances used by customers or wheelchair users. With retractable grilles, assess stacking space first, then consider the threshold, fixing position and security specification.
Key takeaways
- A single grille folds towards one side; bi-parting panels meet in the centre and stack on opposite sides.
- Compare the clear opening after stacking, rather than the overall frame width alone.
- Security ratings apply to the tested assembly, including its locks, tracks and fixing arrangement.
What retractable security grilles provide
A retractable grille is a collapsible steel lattice barrier with scissor-style links. It slides sideways and folds into a stack when open. Unlike fixed window bars, it lets you uncover most of the opening without removing the installation.
The open lattice preserves natural light, ventilation and visibility when extended. However, it doesn’t provide the weather protection or insulation of a solid barrier. Our comparison of security grilles and window shutters explains that distinction.
Galvanised steel is standard for strength. Aluminium is lighter and rust-resistant, so it can suit domestic doors and windows, although material alone doesn’t establish security performance.
Diamond X and curved S lattice designs offer different appearances. A powder coated finish is available in a broad RAL or BS colour range, often over an anti-corrosion primer. A finish matching the frame can make a domestic installation less conspicuous.
Single or bi-parting: where will the panels stack?
Measure the space beside the opening before choosing security grilles and their layout. Handles, display shelving and nearby walls can prevent a folded grille from parking where expected.

Single-side layout illustration: the folded stack needs space beside the opening.
Choose single-parting when one side has room
A single-parting grille moves across the opening and stacks at either the left or right. It suits narrower entrances and windows where one side offers a parking position.
However, that one stack contains the full grille. Within a narrow reveal, it can reduce passage width. The installation drawing should show both the closed grille and its folded position.
Choose bi-parting when two smaller stacks fit better
Bi-parting grilles have two sections that meet and lock in the centre. Each folds towards its own side, which often suits large retail shopfronts or patio-door openings.
This splits the parking requirement between two positions. Both stacks still occupy space, so the layout doesn’t automatically create more clear width. Consider traffic flow, everyday access and whether both sections can be opened conveniently. Check that neither stack obstructs a door leaf.
Face or reveal fitting affects the clear opening
Face fitting mounts the frame onto the surrounding wall or structural framing. It’s often preferred on doorways because the tracks and folded stack can sit outside the opening, where sufficient side space exists.
A reveal fitted grille sits within the opening. It looks neater and more integrated, but its frame and stack can reduce the usable width.
Neither fitting method determines whether the grille sits internally or externally. Internal fitting is common, while external installations need suitable corrosion protection and weather-resistant components.
For patio doors and ground-floor windows, the survey should account for handles, opening sashes and curtain clearance. A grille mustn’t prevent a designated escape window from opening properly.
Choose the bottom track around everyday access
The top track carries the grille. On tracked systems, the bottom track guides and restrains the lower edge. That lower detail deserves attention at entrances used by wheelchairs, pushchairs or deliveries.

Illustrative threshold comparison; the certified product design determines the permitted arrangement.
Hinged or lift-out tracks
Doorway bottom tracks are often hinged or lift-out, so they can clear the walking route when the grille is retracted. This can suit premises secured overnight and opened fully each morning.
The daily routine matters. Someone must put the track into its correct position before closing the grille, and lift-out sections need a safe storage place.
Trackless systems
A trackless barrier has no bottom track. It reduces trip hazards and avoids fixing a rail across polished flooring, which can suit busy internal circulation routes.
These systems are typically quoted at around 5% to 15% less than fully tracked alternatives. However, compare equivalent sizes and security specifications. A trackless barrier may provide a different level of protection, and removing a track from a rated grille changes the tested assembly.
Match security ratings and locks to the risk
The layout should satisfy your access needs without weakening the security specification. A centre meeting point doesn’t, by itself, make a bi-parting grille less secure.
Understand LPS 1175 ratings
LPS 1175 is a recognised UK standard for resistance to forced entry. Before choosing a security rated grille, check its product certificate for the exact LPS 1175 designation.
Ratings consider both attack tools and minimum resistance time, as explained in LPS 1175 testing guidance.
Common legacy ratings include SR1, SR2 and SR3, sometimes marketed as Levels 1, 2 and 3. They involve minimum attack times of one, three and five minutes respectively, with different permitted tool sets. These are controlled test conditions, not promised burglary durations.
Newer LPS 1175 certificates can use letter-and-number classifications, so check the complete designation rather than relying on a broad level label. Secured by Design is a police-backed accreditation initiative, rather than another LPS resistance level.
Specify the complete locking arrangement
High-security grilles usually use multi point locking. Other designs use cylinder-operated or cam locks. The locking arrangement matters alongside the lattice, frame, tracks and fixings in the tested assembly.
For bi-parting grilles, the central meeting stiles and their engagement form part of the security rated assembly. Check that the certificate covers the complete assembly and that it meets your insurer’s requirements. If your insurer asks for an insurance approved grille, confirm the requirement against the product documentation. The label “insurance approved” alone isn’t evidence of a tested product.
What retractable security grilles cost
Broad advertised UK prices of about £180 to £1,650+ cover different sizes and specifications. These prices don’t show the full supply and installation cost for a complete doorway.
For non-rated retractable security grilles, indicative prices are £450 to £650 per metre width supply-only, or £850 to £1,200 per metre supplied and installed.
Multiplying those rates by the opening width gives these budgeting figures.
| Opening width | Supply-only estimate | Supplied and installed estimate |
|---|---|---|
| 1.2-metre doorway | £540 to £780 | £1,020 to £1,440 |
| 3-metre shopfront | £1,350 to £1,950 | £2,550 to £3,600 |
These calculations are starting points, rather than project quotations. Height, security rating, track design and fixing preparation can change the total.
Single and bi-parting layouts cover the same opening width, so bi-parting doesn’t automatically mean double the price. However, fabrication and hardware differ. Fire-exit release arrangements commonly add around £150 to £400.
VAT, removal of an existing barrier and making good also affect comparisons where excluded. Our security grille pricing guide covers the wider cost factors.
Survey the structure and protect escape routes
Retractable grilles are made to measure. A site survey should establish the opening dimensions, stacking positions, fixing suitability and escape requirements before quotation.
Fix into a suitable structural substrate
The frame needs secure fixing into masonry, steel or reinforced framing. Decorative trim, plasterboard and an unsupported window frame aren’t substitutes for a suitable structural fixing point.
The installer must assess whether the opening is square, plumb and level, then correct irregularities through suitable preparation. Otherwise, the grille may bind or fail to engage its locks properly.
Installation includes setting the tracks, securing the frame and testing full travel and locking. Our installation and survey service includes security grilles.
Design emergency release into the specification
An occupied escape route must open readily from inside without a key. Fire exit grilles need a compliant internal release arrangement.
BS EN 1125 covers panic hardware, generally for situations where users may be unfamiliar with the exit. BS EN 179 covers emergency exit devices for users familiar with the route. The appropriate arrangement depends on the premises and escape strategy.
In England, Approved Documents B and M address fire safety and access respectively. A competent fire-safety professional should assess any grille proposed on a fire escape route. A hinged bottom track alone doesn’t make the installation suitable.
Keep tracks, lattice and locks working properly
Plan routine maintenance inspections every six to twelve months. Higher-risk environments may need quarterly checks, alongside the manufacturer’s maintenance requirements.
Inspect track alignment, lock engagement and lattice joints for wear. Also watch for loose fixings, corrosion and changes in operating effort. Both halves of a bi-parting grille should travel freely and meet without being pulled into alignment.
Keep tracks clear of debris and use only the lubricant specified for the mechanism. Forcing a sticking panel can damage its links or locking components.
If a grille starts catching or moving unevenly, our guidance on binding security grilles explains safe next steps. Regular servicing helps identify developing faults before they prevent the grille from securing the opening.
Frequently asked questions
Are retractable window grilles removable?
They normally remain fixed to the building and fold aside for access. A lift-out bottom track is removable, but that doesn’t make the whole grille removable. Purpose-designed removable bars are a separate product option.
Can a grille guarantee protection against a break-in?
No physical barrier guarantees that. A correctly installed, independently rated grille provides tested resistance and can delay forced entry. Its usefulness also depends on the surrounding structure and the property’s other accessible openings.
Can grilles fit unusual window shapes?
Made-to-measure manufacture accommodates different dimensions, but the mechanism still needs a suitable frame and travel path. An arched opening may need a rectangular supporting arrangement, subject to structural, security and escape requirements.
Choose the layout that keeps the doorway usable
The right layout leaves enough clear access after the grille folds back. Single-parting works well with one generous parking position; bi-parting suits openings where two smaller stacks fit better.
Settle the track and fixing arrangement alongside the security rating. These decisions affect everyday use as much as the lattice pattern.
To arrange a free installation survey, Contact Us.




Leave a Reply
Want to join the discussion?Feel free to contribute!